Metal Buildings in Burleson, TX
Insert Content
Insert Content
Insert Content
Insert Content
Steel Structures Raised for the Work You Actually Do
Anchor bolt patterns must be set within a quarter of an inch before the slab cures, because a steel frame simply cannot be shimmed back into position afterward. Metal Master Roofing and Construction LLC designs, engineers, and erects custom metal buildings for shops, storage, warehouses, equipment sheds, and agricultural use, from wide red iron clear spans to lighter tube framing for smaller shelters, around Burleson, TX, throughout Johnson County, and into the neighboring Hood, Ellis, and Tarrant counties.
Frames arrive with stamped engineering sized for the wind and load conditions this region genuinely produces, and slab coordination, erection, sheeting, trim, doors, and gutters all run through one team on a single schedule. Insulation packages, door placement, and room for future expansion get settled on paper first, backed by 45+ years of putting up steel across this county. Send your dimensions, door sizes, and intended use through our contact page for a free written quote.
Metal Buildings We Construct
For more information about lorem ipsum or to schedule service, call us at 817-372-2425 or click the button to fill out the form!
Red Iron Frame Buildings
Engineered I beam frames carry the widest clear spans and the heaviest loads, which is why commercial and industrial projects specify them. Every member is sized by an engineer for your span, wind exposure, and intended use. Nothing about it is generic.
Tube Frame Buildings and Carports
Square tube framing suits covered parking, equipment shelters, and lighter storage where a full engineered frame exceeds the need. Costs stay sensible and erection moves quickly, without giving up meaningful strength for the application. Permitting is usually simpler as well.
Insulated Shops and Workshops
Vapor barrier blanket, rigid board, or insulated panel assemblies keep a working shop usable in July and January alike. Wall and roof values are selected around how the space gets heated, cooled, and occupied. Comfort decides whether a shop gets used.
Agricultural and Equipment Barns
Hay storage, implement sheds, and livestock shelter each place different demands on a structure. Bay spacing, eave height, and door openings are laid out around the machinery and animals the building actually has to serve. Ventilation and drainage get planned too.
Warehouse and Storage Structures
Distribution and storage buildings need column free floors, dock height doors, and roofs that stay dry over the inventory. Layout follows your racking plan and traffic pattern instead of a catalog page. Column placement follows your forklift paths, not a template.
Building Repairs and Panel Replacement
Storm damaged panels, rusted base trim, sagging gutters, and failed fastener gaskets all get addressed on existing structures. Older buildings usually need targeted repair and reskinning far more than they need replacing. A tired building often has decades left in it.
See Our Work
Explore completed metal roofing and metal building projects from Metal Master Roofing and Construction LLC. Browse our gallery to see the quality, craftsmanship, and results we deliver across Texas.
FAQ's
What is the difference between red iron and tube framing?
Red iron uses welded I beams engineered for the specific building, carrying wider spans and heavier loads. Tube framing uses square steel and suits smaller shelters, carports, and light storage where those demands stay modest. Span and load usually decide it.
Do metal buildings need a concrete foundation?
Nearly always. The slab anchors the frame against uplift and gives you a working floor, with thickened edges and embedded anchor bolts set to the frame drawings before any concrete is placed. Slab thickness and reinforcement follow the engineered frame reactions.
How wide can a building span without interior columns?
Clear spans past 100 feet are routine with engineered red iron frames. Beyond that, interior columns or modified frame designs usually make better sense structurally and economically for the same enclosed square footage. Frame depth naturally increases along with the span.
Can a metal building be insulated effectively?
Yes, and it should be. Options run from faced blanket insulation between the purlins to rigid board and factory insulated panels, chosen around whether the space is conditioned, occasionally heated, or simply sheltered. Vapor control matters as much as R value.
Do I need a permit for a metal building in Texas?
Inside city limits, almost certainly, and rural counties often require one as well. Requirements vary between incorporated and unincorporated land, so Metal Master Roofing and Construction LLC checks what your specific address demands before any Burleson, TX project begins.
How long does it take to erect a metal building?
Engineering and fabrication generally take longer than erection itself. Once steel arrives and the slab has cured, a modest shop frame goes up in days, with sheeting, trim, and doors following behind. Weather and inspection scheduling shape the final timeline.
Can a building be expanded after it is finished?
Yes, if the endwall is designed as an expandable wall from the outset. Planning that detail early costs almost nothing and saves considerable structural work when the extra bays are eventually needed. Retrofitting an unplanned endwall is far more involved.
What roof pitch do metal buildings normally use?
Most run a 1:12 or 2:12 slope, which sheds water while keeping the profile low. Steeper pitches are available where appearance matters, and Metal Master Roofing and Construction LLC builds both around Burleson, TX. That has been our practice for 45+ years.
Why Choose Us for Metal Buildings
Clear Spans That Stay Out of Your Way
Column free interiors let you park equipment, run a lift, or rack inventory wherever the work demands. The structure carries itself overhead so the floor plan answers to your operation rather than to the framing. Nothing overhead gets in the way.
Engineered for North Texas Wind
Frames, anchors, and connections are sized against the wind and load conditions this region genuinely produces. That engineering is what stands behind a building during the spring squall lines that roll across the county. Stamped drawings accompany every engineered frame.
A Shell That Holds Its Temperature
Insulated wall and roof assemblies keep summer heat outside and conditioned air inside, which matters enormously in a working shop. Comfortable buildings get used year round instead of being abandoned each August. Heating and cooling equipment can also be sized smaller.
Room to Add On Later
Endwall framing can be planned so a future bay bolts on without demolition or reengineering. Growth becomes an extension of what you already own rather than a second building on the property. Planning for that day costs almost nothing now.
One Point of Contact Throughout
Slab coordination, frame erection, sheeting, trim, doors, and gutters run through the same team on the same timeline. You get one number to call and one party accountable for how it all fits together. Schedules stop slipping between separate trades.
Openings Placed Where You Need Them
Overhead doors, walk doors, windows, and vents are located around your workflow before framing is finalized. Moving an opening on paper costs nothing; moving one through a finished wall costs a great deal. We map that layout with you first.
Buildings That Earn Their Footprint for 40 Years
Steel makes sense for the same reason it always has: it goes up quickly, spans further than timber, and asks very little once it stands. Owners across Burleson, TX use these structures as shops, barns, warehouses, and second workspaces, and the good ones are still working long after the original purpose changed. Think through how the space might be used a decade from now, not just next spring. Bay spacing, eave height, and door placement are far easier to change on paper than in steel. When you have a rough idea sketched out, send it through our contact page and we will price the building properly.
Why Choose Us
Locally Owned and Operated
We are locally owned and operated, giving us a firsthand understanding of the roofing needs of property owners throughout Burleson and the greater North Texas area.
45+ Years of Experience
With more than 45 years of industry experience, we bring extensive knowledge and proven craftsmanship to metal roofing, commercial roofing, and specialty construction projects.
Quick Response Time
We understand that roofing and exterior projects require timely attention, so we prioritize fast responses, clear scheduling, and efficient service from the initial consultation through completion.
Premium Materials
We use high-quality roofing, siding, and building materials selected for their durability, performance, and ability to withstand the demanding North Texas climate.
- Maecenas Elementum
"Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum consectetur dapibus rhoncus. Curabitur et congue odio. Donec consequat consequat velit. Vestibulum in congue neque. Morbi iaculis lorem sed enim tincidunt finibus. Suspendisse egestas nulla et eros sodales dignissim. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos"
Read Our Reviews
Location 9
Location 19
Areas We Served
Burleson, TX
Fort Worth, TX
Arlington, TX
Dallas, TX
Plano, TX
Garland, TX
Irving, TX
Grand Prairie, TX
McKinney, TX
Frisco, TX
Denton, TX
Carrollton, TX
Richardson, TX
Lewisville, TX